[RAT]How To Setup CyberGate 1.02.0 (THE CORRECT WAY!), No-IP, & Port Forward [TUT]

Many People Have Been Setting Up CyberGate Servers Wrong With The New CyberGate As Shown In The Other CyberGate 1.02.0 Guide. So even if you know how to use CyberGate, it is recommended you look at Part 3 of this tutorial (3. Building Your CyberGate Server) and scroll down to Number 8 to see the correct way of creating a server in CyberGate 1.02.0.

1. Setting Up No-IP

1. Go to http://www.No-ip.com

2. Create an account and log in, then press Add Host.

3. Now name your host to whatever you want. For example I will name my host xzxmikedxzx.no-ip.biz. Just follow these settings and press Create Host.



4. Now go here - https://www.no-ip.com/downloads.php and download No-IP's Dynamic DNS Update Client,

5. Once downloaded, install it. Then open it up and put in your account name and password. Then it should update, after it does check the box next to your no-ip host.

It should look something like this:



You are now finished setting up No-IP!

2. Setting Up CyberGate

1. Download CyberGate and open it. You can find the download in Cyber-Sec's forum, which you need at least 5 posts to obtain - http://www.cyber-sec.org/forum/ or you can download it here - http://www.mediafire.com/?mmwwnj5ofzz

2. Now click Control Center - Start

3. Click Control Center - Options - Select Listening Ports And Do Following:



You are now done with setting up CyberGate!

3. Building Your CyberGate Server

1. Click Control Center - Builder - Create Server. Make a user named Hacker and press Ok.



2. Mark the user "Hacker" And press Forward.

3. Press 127.0.0.1 | Port 999 and press Delete:



4. After that, Click Add.

5. A Box should pop up saying: 127.0.0.1:81. Remove everything and change it with the No-ip address host you added. So let's say you used example.no-ip.biz. Change 127.0.0.1:81 to example.no-ip.biz:82. So it should look like this:



6. Now Change the
Identification: remote
Password: cybergate

To This:
Identification: Cyber
Password: 123456

7. Go to the next tab "Installation"

8. Use the Exact same settings as i do:



Important Info:
Most people set the Installation Directory as System. I talked to jonhyk (the creator of cybergate) and he advised not to do this when using UAC bypass (which you want on). This is because, from jonhyk himself, "cybergate is not able to write into protected folders if UAC is enabled". I also don't use Winlogon.exe for the File Name because Windows Defender catches cybergate if you do so. So it is best using my settings as shown above.

9. Now Skip the Message, Keylogger, and Anti Debug tabs, since these are already set up right for us.

10. In The Build Server have the exact same settings checked as I do.

Except Google Chrome Passwords is optional. If you would like to have it checked like I do, go to http://www.110mb.com and create an account. Then log in to your account and go to file manager. Then click upload and upload sqlite3.dll (it is located in the same folder cybergate is located on your computer). Then once you check Google Chrome Passwords on Cybergate it will ask for a link, put in http://www.username.110mb.com/sqlite3.dll



11. Press Create Server and save the settings.

You are now done creating you server!

4. Forwarding Your Ports, If You Have Not Done So

Your now going to have to forward port 82 on your router if you have not done so, this is how:

1. Click Start on your computer and click Run. If you have Vista and I think Windows 7, you need to search Run in the search bar in the start menu, then click Run.

2. Type cmd and hit enter.

3. type ipconfig and press enter.

4. You should see something like this, write down or remember these last digits that I selected in the picture below:



5. Now go to http://www.portforward.com

6. Scroll down and select your router.

7. Scroll down and you should see a bunch of programs, click "1st SMTP Server"

8. You should see at the top telling you to enter your static IP



9. Type in the digits I had you remember in step 4. My digits were 114 so I entered that.

10. Now just follow the tutorial, but when it says forward port 25, forward port 82 instead.

11. Once you are done, go to http://www.canyouseeme.org

12. Type in 82 in the box next to "What Port?" and click check.

13. If you got "Error: I could not see your service on IP ADDRESS HERE on port (82) Reason: Connection refused" Make sure your firewall is off and try again.

14. You should get "Success: I can see your service on ADDRESS HERE on port (82) Your ISP is not blocking port 82"

Port 82 should now be open!

5. Crypting Your Server To Make It FUD (Fully Undetectable To Anti-Viruses)

I have used MANY crypters before. Some are decent and others are not so good. The very best crypter I have ever used and I still use is Darty Crypter and I recommend everyone to get this crypter if you want to keep your server FUD and stable.




Your server is now completely FUD and ready to go, have fun spreading your server without your victims knowing they have a virus!

You are now done with everything, have fun using CyberGate!

Hope you liked this tutorial, took a lot of time making it. Please Say Thanks!